Tag Archives: Heating & Cooling

Details About Furnace Repair

Gas furnaces use propane or natural gas for heating surrounded living spaces. While gas is often spoken of as an expensive means of heat, gas furnaces typically burn cleaner than oil furnaces and thus present less reparations to their owners than oil furnaces. Even when gas furnaces cause problems, they are usually easy to detect and are not labour intensive to fix. Below are four problems frequently found with older gas furnaces and what you can expect from repairs.If you’re looking for more tips, Furnace repair has it for you.

A furnace does not contain heat

If your gas furnace does not generate heat, it would possibly experience one of the following problems: a closed control valve, a broken fuse or tripped circuit, a defective thermostat or a non-working pilot light. While you might be able to fix these problems yourself, if you are not familiar with gas furnaces, it is better to call a gas furnaces repair service (i.e. a heating and cooling firm). Regardless of all of the above problems your furnace is experiencing, the problem will be repaired by an HVAC repair technician on the same day and none of the above problems should result in substantial repair costs.

If your furnace produced less heat, it could be because it occludes the blower, the blower belt is loose, or the filter or burner is dirty. Such issues, too, will occur at once. As with a furnace which produces no heat, a furnace which produces insufficient heat resulting from one of the above problems may typically be repaired at reduced cost on the same day. If a repair technician for gas furnaces indicates that the problem stems from one of the above issues but that some of the other issues appear to be immanent, save money and have them all repaired in one visit.

A Furnace Keeps On and Off

If your furnace turns on and turns off before achieving the desired heat level, one of the following issues is likely to arise: a blocked blower, a dirty filter or an excessively dry motor. In the first case, a technician will use a vacuum to clean out your blower and its surrounding area; in the second case, the technician will remove or clean your temporary air filter and reinsert your permanent air filter; in the third case, the technician will lubricate the engine by putting oil in the oil ports required. In any case the cost of the service will be low again.