Goat Milk Soap Recipe

Goat’s milk has received some strong attention in the last couple of years. For all of this milk ‘s wonderful advantages it’s no wonder people flock to it. This produces alpha-hydroxy acids that replace the dead skin cells enabling the fresh skin cells to grow. This also provides plenty of skin-friendly vitamins and minerals. Goat milk soap is certainly no different. This has all the good properties of goat milk and a lot of moisture has been applied to the oils. Visit Goat Milk Soap-GOAT Soap.

Here is a fantastic recipe for soap using this milk. It is assured to soothe every sort of skin infection. Safety first! Check to wear goggles, chemical-resistant gloves, long sleeves and long pants.

Here’s the Ingredient Collection.

  • 430 grams of Clean Goat Milk
  • 165 grams of Sodium Hydroxide
  • 454 gram Olive Oil
  • 397 g Coconut oil
  • 227 grams of Palm Oil
  • Shea butter 57 g
  • 2 Lbs. Powdered goat’s milk

Once all of the ingredients are in place the first thing you need to do is freeze the milk. It will be less likely to burn, by freezing it. Take it out from the freezer once it’s frozen.

Now, weigh the lyes. Apply the lye to the frozen milk, gently. Ensure that you gradually apply the lye to the frozen goat milk. If the lye is applied the goat milk should continue to melt. Put aside until much of the lye is added to cool off. The lye solution will refrigerate to around 100 degrees.

Measure coconut oil and palm oil; place them in a container which can be microwaved. Put the container in the microwave oven. Microwave for a number of minutes before the oils melted completely. The Shea butter is then measured and added to the melted oils. Stir to insert. Melted gently, the shea butter allows for a great finished result.

Now the olive oil is weighed and applied to the other oils and butter. You also like the oils to be around 100 degrees too. When the lye solution and the oils are the right temperature, gradually apply the lye to the oils.

Take your stick blender and mix until a slight trace is reached. When you have a residue apply goat milk powdered. Grab your stick mixer and mix it up again. You ‘re going to want to mix up before you hit a full trace.

Then take the mix and place it in a jar. Towel-insulate. Leave the mold on its own for 10 to 12 hours. And the soap unmolds. Split the soap into bars and placed them on a approximately 6 to 8 weeks drying shelf.