Category Archives: Masonry

The Tools Needed When Working With Bricks and Concrete

The article will cover a variety of the most commonly used tools in the construction industry, with particular reference to certain tools used when dealing with bricks and concretes. Building work includes tools of general use as well as some specialized ones that are only used for particular materials, including concrete, brick, stone, block or tile. bricklaying tools  is an excellent resource for this. Most of them are commonly available at hardware stores and builders retailers, and some seldom used ones can be employed, such as a cartridge hammer or a quarry tile cutter.

A meter-long spirit pipe, a steel square, a tape measuring 10 or 20 metres, a cold chisel for chipping mortar and concrete and a club or lump hammer are the most appropriate general tools to purchase. A small wood float for levelling, a steel float for smoother finishing, a darby or screen for smoothing wide areas and an edging tool for rounding the sides of a slab are special tools required for concrete work. Other devices that can be used to lay and finish a brick or block wall are a brick-layer hammer and a broad-laded chisel. A small mortar board called a hawk may be used for cutting and laying, to keep mortar close to the job.

A bricklayer trowel is needed alos to spread the mortar. Also needed are a variety of other items: a joint filler, also called a finger or window trowel for filling extra long joints with mortar A pointing trowel for filling joints and for forming ground, struck, flush and extruded joints A rounded joining tool for concave joints A carbide tipped masonry bit in an electric drill is useful for putting small holes in concrete blocks. You may use a star drill for holes larger than 20 mm, a kind of chisel which is intended to be struck with a hammer.

Using a V-notched square trowel to score the bed joint while laying bricks on a horizontal surface, like a patio for example. For tile work, to score the bed joint you’ll need a square trowel with rectangular notches. The tiles can be formed with a pincer such as tile nipper.

While most of these tools are needed to complete any job involving work with bricks and mortar, it is not necessary to purchase every single tool before starting the job. This is also necessary to make sure you understand the scale of any concrete work and calculate the amount of cement used by using a cement calculator to determine the amount of materials used.

It is necessary to make sure that you measure the quantity of materials correctly before doing any job involving concrete and bricks.